The Converter RS485 to LoRa wireless, DIN rail, TIV49A_R3, with antenna 433MHz is used for replacement of wire communication to a wireless radio communication. This converter acts as communication interface and converts RS485 communication into LoRa wireless network. On the other side, this module convert wireless LoRa radio signals back to wired signals. It can work as a master-coordinator on Sigma side, also as a slave router and endpoint on Nano \/ Quark \/ Micro \/ Pico side. The installation is easy, assembly and connection concept is not complicated. Module is ideally suited to convert the wire communication into wireless in middle-sized and large on-grid solar power plants. Its benefit is to use it due to lightning strikes, due to too high potential voltage differences between sectors of solar power plant and because of too long distances of cables. Consequently also because of the costs of laying the cables into the ground and cables itself.<\/p>\n
Overview<\/p>\n
Professional use
\n\u2022 Wireless communication interface between SIGMA and positioners
\n\u2022 Integration of Sat Control equipment into existing control-room technology
\n\u2022 Automatic update of firmware from Sigma via (OTA)<\/p>\n
Flexible
\n\u2022 Data interface in accordance with custom MODBUS communication standards in the field of automation
\ntechnology
\n\u2022 Simple and fast installation, high reliability
\n\u2022 Possibility of replacing the LoRa and ZigBee interface without replacing the converter
\n\u2022 Possibility of using converters for routing to out of line-of-sight positioners<\/p>\n
Reliable
\n\u2022 Direct communication with the Sigma Solar Server via RS485 Service Interface
\n\u2022 Meets the requirements of the EU Low-Voltage Directive for grid safety management
\n\u2022 LoRa Wireless network, easy installation which means no communication cables
\nfor installation on ground
\n\u2022 Less chances of spreading damages due to lightning strike<\/p>\n
Technical capabilities<\/p>\n
– Geometrical operation for Single \/ Dual Axis Positioners up to 48 devices on one converter<\/p>\n
-Type: Sigma side as master converter, positioner side as slave converter (sold separately)<\/p>\n
-Communication:
\nPositioner communication: custom MODBUS (RS485)
\nWireless communication protocol: LoRa 433MHz physical layer protocol<\/p>\n
– Interfaces
\nMax. Number of controlled devices: up to 48 different positioners\u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 USB-C 2.0 communication interface for Helios Analytics software (for set-up)<\/p>\n
-Max. Communication range
\nWireless range: 1 km on open field, up to 5 hops via other Lora converters is 5 km<\/p>\n
-Power supply<\/p>\n
External SMPS type required (not included)
\nInput voltage\u00a0 24 VDC +5% \/ \u201315%
\nPower consumption in idle\u00a0 0,25 w<\/p>\n
– Environmental conditions in operation<\/p>\n
Ambient temperature \u201330\u00b0C … +80\u00b0C
\nRelative air humidity\u00a0 0% … 85%, non-condensing<\/p>\n
-General data
\nDimensions (L \/ W \/ H) in mm – 81-150 \/ 45 \/ 25
\nWeight – 55 g
\nMounting location – Indoor
\nMounting options – DIN rail mounting 35\/7,5mm
\nStatus display : LEDs for; power (1), RS485 TX\/RX (2) + LoRa RX\/TX (2)
\nSignal power programmable up to 158 mW (22 dBm), up to 1W module with additional module
\nManual buttons 2 (Bind and Boot)<\/p>\n
Upgrading: In the field via Sigma trough Wireless network (OTA) with LoRa module
\nvia USB-C interface using Helios Analytics software
\nvia RS485 wired connection to SIgma
\nLanguage versions \u2013 English manual
\nWarranty – 2 years*
\nCertificates and approvals – CE
\nLife Time – Min. 10 years; typical 20 years
\n*Optionally more for additional payment<\/p>\n
DOCUMENTATION: <\/p>\n","protected":false},"excerpt":{"rendered":" The Converter RS485 to LoRa wireless, DIN rail, TIV49A_R3, with antenna 433MHz is used for replacement of wire communication to a wireless radio communication. This converter acts as communication interface and converts RS485 communication into LoRa wireless network. On the other side, this module convert wireless LoRa radio signals back to wired signals. It can work as a master-coordinator on Sigma side, also as a slave router and endpoint on Nano \/ Quark \/ Micro \/ Pico side. The installation is easy, assembly and connection concept is not complicated.<\/p>\n","protected":false},"featured_media":9305,"comment_status":"open","ping_status":"closed","template":"","meta":{"inline_featured_image":false},"product_brand":[],"product_cat":[66],"product_tag":[],"class_list":{"0":"post-795","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-solar-plc-controller-accessories","7":"pa_country_of_origin-slovenia","9":"first","10":"outofstock","11":"taxable","12":"shipping-taxable","13":"purchasable","14":"product-type-simple"},"yoast_head":"\n
\nTechnical datasheet ENG Medium resolution: konverter RS4852 Lora_MR.pdf\u00a0 Converter RS485 to Lora_LR_MR<\/a>
\nTechnical datasheet ENG Low resolution: konverter RS4852 Lora_LR.pdf\u00a0 Converter RS485 to Lora_LR<\/a><\/p>\n